Linear
GE 软水器设置问题 (水城百事)
大家好，
我住Kitchener Ottawa/Flscher Hallman这边，国内回来发现软水器不工作了，旁边的排水小管子一直出水，不知道怎么操作，想问下大家有谁会设置这个东西的，
最好可以给个详细的参数，直接输入
GE的，model:255/760,
1：time/day
2:regeneration time
3:salt amount
4:capacity
5:hardness
然后屏幕下方四个按键，；其中一是“循环”的标志是做什么的也不知道，
谢谢
![[image]](http://i48.tinypic.com/34wlx.jpg)
请大家帮忙给个详细的设置参数吧，谢谢
[ No text ]
哪个管子出水？
[ No text ]
就旁边一小管子，我想平常可能用来排水的，水已经停了，不是主管上面的，反正这个不重要，家里的水变成有味道了，是不是久没用会有味道呢？请给软水机里面的数据，好设置下，
[ No text ]
到GE的网上应该可以下载到手册。http://www.geappliances.com/
[ No text ]
上GE公司网站！英文不好，没有人家用这个牌子的吗？如有直接输入参数多好,
[ No text ]
1：time/day: set current time as your clock 2:regeneration time: 2am 3:salt amount 4:capacity 5:hardness: 25 ~ 30 in kitchener
1：time/day: set current time as your clock
2:regeneration time: 2am
3:salt amount
4:capacity
5:hardness: 25 ~ 30 in kitchener
然后屏幕下方四个按键，；其中一是“循环”的标志是做什么的也不知道，:regenerate tonight if you press one time, regenerate immediately if you press and hold more than 5 seconds.
The capacity shows how much capacity left before next regeneration.
The salt amount shouldn't change.
Normally if people on vacation and the softener lost power for a long time, the time will change when power back on.
If water stopped coming out of the drain line by itself, that means softener was regenerating when you were present. You just need to set time/day and regeneration time. But the best way to make sure softener is working or not is by testing water.
先这样，谢谢啦
[ No text ]
Delete Cookie